- High heat transfer performance
Integrated with low fins on
the tube has excellent heat
as well as durability.
- Wide range of materials
The tube can be manufactured
using a variety
of materials including copper,
low carbon steel, stainless
alloys and titanium.
- Making heat exchangers compact and lightweight
Because of its superior heat
compared to smooth tubes, EVER
FIN L can
reduce the number of tubes,
thus making heat
exchangers compact and lightweight.
- Wide variety of fin configuration
Tubes with various fin pitches
Furthermore, both tube ends
and the land
portion on its middle may optionally
un-finned, which makes it possible
the tube onto tube plates in
the same way
as for smooth tubes.
|Heat exchangers for turbo refrigerator, absorption
type refrigerator and screws; general refrigerators,
petrochemical plant equipment, boilers and
solar energy equipment.
|EVER FIN L (Type S/T) These are low-fin tubes
with fins 0.8-1.4 mm in height, and 16,
19, 26, 28, 35 or 40 in the number of fins
per 25.4 mm. The outside diameter of the
finned portion does not exceed that of un-finned
tube ends. The table below shows the materials
that can be manufactured into the tube.
|Phosphor deoxidized copper,Aluminum alloys,
Low carbon steel (Seamless tube),
Low carbon steel (Welded tube),
for low temperature use,
Stainless steel 316L , Stainless
Stainless steel 304, Stainless
Stainless steel 316, Titanium