Outline(for Metallic Roof)
The insulation of a metallic roof in the subtropics region of the high temperature and humidity was the one with fiberglass so far.
When it is conventional method, heat from the sun of daytime can be intercepted.
However, the room temperature rises because of the heat accumulated in daytime at night.
In the method of our foam product, I will make heat discharged at night to say nothing of daytime, and offer the environment spent easily.
Advantages
Comparison of heat flow inside the roof
Daytime
Nighttime
Temperature Distribution Measurement
Dressing room installed by conventional method
Canteen installed by Furukawa's method
Structure of Insulation
Structure of Insulation
Inside the Attic of dressing room
Inside the Attic Canteen
Inside the dressing room
Inside the Canteen
The Results of Measurement
Installed by Furukawa's Method
2000/04/21 to 04/22 Temperatures distribution in the canteen
Installed by Furukawa's Method
2000/04/21 to 04/22 Temperatures distribution in the dressing room
During Daytime 7:00 to 18:00
The average temperature at the standing point of Furukawa's Method was 0.5°C cooler than that of Conventional Method.
During Daytime 7:00 to 18:00
The average temperature at the standing point of Furukawa's Method was 0.5°C cooler than that of Conventional Method.