How to use MCPETDiffusing Cap , Diffusing MCPET Cap
Diffusing Cap
Diffusing MCPET Cap
Diffusing Cap and Diffusing MCPET Cap supplement the MCPET reflector.
With thin signboards and thin box-form signboards illuminated from inside, the luminance tends to become uneven because the light source and acrylic boards are located close to each other. By using MCPET reflector board together with Diffusing Cap, the image of the lamp can be eliminated.
The product can be worked easily - it is necessary only to cover the fluorescent lamps.
Product brochure
Microcellular Reflective Sheet MCPET(PDF 478KB)
Ultrafine foamed reflective sheet MCPET, A1 Grade (PDF 227KB)
Diffusing MCPET Cap (PDF 368KB)
Documents files are in PDF format. If Adobe® Reader® is not installed on your computer, use this link to download the software.Example of Effects(Diffusing Cap)
Attached to the lamp at left
Reflector plate: MCPET
Lamp: φ24 at a pitch of 150
Reflector plate: MCPET
Lamp: φ24 at a pitch of 150
Unevenness is resolved with the lamp at left only.
pper surface of fluorescent lamp to opaque half: 15mm
Milk translucent: Mitsubishi Rayon's #430,
Signboard thickness: 3mm
pper surface of fluorescent lamp to opaque half: 15mm
Milk translucent: Mitsubishi Rayon's #430,
Signboard thickness: 3mm
Example of Effects(Diffusing MCPET Cap)
| Without an MCPET Cap Reflector : Steel sheet with white coating |
Diffusion with an MCPET Cap Reflector : MCPET with center ridge |
|
 |
 |
 |
| FL20×2 units; Pitch: 250mm; Milk translucent: Mitsubishi Rayon's #430, 3mm t; Signboard thickness: 90mm |
FL20×2 units; Pitch: 250mm; Milk translucent: Mitsubishi Rayon's #430, 3mm t; Signboard thickness: 90mm |