PPPoEインタフェースの情報を表示します。
Router#show interface pppoe 1 PPPoE1 is up PPPoE lower interface is EWAN 1 PPPoE Server Name is XXXXX PPPoE Usr Name is xxxx@xxxxx.xxx.xx PPPoE Primary Dns Address is xxx.xxx.xxx.xxx PPPoE Secondary Dns Address is xxx.xxx.xxx.xxx PPPoE Internet Address is xxx.xxx.xxx.xxx PPPoE Service Name is not configured PPPoE Type is host PPPoE IPv6 Link-Local PPPoE Connection Time is 080705.123441 Last clearing of "show interface" packet counters never Statistics: 1 connect count 1 connected count 0 connect fail count 14 packets input 899 bytes input, 0 errors 14 unicasts, 0 broadcasts, 0 multicasts 0 discards, 0 unknown protocol 14 packets output 558 bytes output, 0 errors 14 unicasts, 0 broadcasts, 0 multicasts 0 discards Router#
項 目 内 容 PPPoE1 is up, このインタフェースの設定が行なわれており、かつPPPoEのリンクが確立しているかどうかを表します。 PPPoE lower interface is 使用している物理インタフェースを表示します。 PPPoE Server Name is XXXXX サービス名称を表示します。 PPPoE User Name is xxxx@xxxxx.xxx.xx 設定したユーザ名を表示します。 PPPoE Primary DNS Address is xxx.xxx.xxx.xxx PPPで取得したプライマリDNSサーバのIPアドレスを表示します。 PPPoE Secondary DNS Address is xxx.xxx.xxx.xxx PPPで取得したセカンダリDNSサーバのIPアドレスを表示します。 PPPoE Internet Address is xxx.xxx.xxx.xxx PPPで取得した、自身のグローバルIPアドレスを表示します。 PPPoE Service Name 設定したサービス名を表示します。 PPPoE Type 端末型接続かLAN型接続か(設定)を表示します。 PPPoE IPv6 Link-Local 学習リンクローカルアドレスを表示します。 PPPoE Connection Time is 080705.123441 PPPoEが接続した時刻を表示します。この例では、2008年7月5日 12:34:41に接続したことを示しています。 Last clearing of "show interface" packet counters 最後に"clear interface"コマンドでカウンタ値をクリアした、時:分:秒: 年/月/日を表示します。 Statistics: このインタフェースの統計情報を表します。
受信側
packets input:総受信パケット数
bytes input:総受信バイト量
errors:受信時にエラーで廃棄されたパケット数
unicasts:受信ユニキャストパケット数
broadcasts:受信ブロードキャストパケット数
multicasts:受信マルチキャストパケット数
discards:受信時にエラー以外で廃棄されたパケット数
unknown protocol:IP以外の未サポートのプロトコル(ethertype)数
送信側
packets output:総送信パケット数
bytes output:総送信バイト量
以下受信側を参照
show interface pppoe [PPPoE番号]
パラメータ 設定内容 設定範囲 省略時の値 PPPoE番号 参照したいPPPoEの番号を指定します。 1〜24 設定されているインタフェースのみ表示します。