Optical Fiber and Cable Identifier japanese
ID-H/R Optical Fiber Identifier

The FITEL ID-H is a rugged, user-friendly tool which identifies optical fibers by detecting the optical signals passing through the fiber utilizing local detection technology.

Features
  • Wide dynamic range.
  • No Head changing or adjustments.
  • LCD screen adoption.
    (Detection Light Level , Modulation Light Frequency , Machinery Information)
  • Detects the signal without disrupting traffic.
  • Detects the tone signal and traffic signal.
  • Lighted LED displays for clear identification.
  • Lightweight design for easy handling.
  • Super low insertion loss.
Optical Fiber Identifier ID-H/R


Constructions
Ordering
Code
Product Name Code Remarks
ID-H/R Main unit AI02H Battery and Strap and Instruction manual are included
Carrying Case AI02H-001 Easily to belt or tool pouch

Specification
Item Specification
Applicable Fiber Up to SM 12-fiber ribbon SM 250µm single fiber Up to 3mm Cordage (built-in only SM 250µm single fiber) SM 900µm tight buffer (Reference value)
Applicable Wavelength 900 to 1700nm
Frequency for Tone Signal 270Hz and 1kHz and 2kHz(Duty ratio 50±10%) Modulation Light
No Modulation Light
Communication Light that Continued
Measurement Range of Optical Power *1 0 to -80dBm
Maximum Level of Insertion Loss (Typical) 1310nm 0.1dB 0.5dB
1550nm 1.0dB 2.0dB
1650nm 2.5dB 3.0dB
Average Minimum Detection Level *2 (Typical) 1310nm -40dBm -30dBm -15dBm
1550nm -50dBm -40dBm
1650nm
Indication for Traffic Signal or Tone Signal [ Traffic Signal *3]
Direction LED illuminates + Intermittent buzzer sound + Displayed an Optical power measurement range by LCD
[ Tone Signal ]
Direction LED illuminates + Tone LED illuminates + Continuous buzzer sound + Displayed an Optical power measurement range by LCD + Displayed Frequency by LCD
Operating Time 8 hours (Using alkaline battery)
Item Storage temperature -20 to 60°C (humidity 0 to 95%)
Operating temperature -10 to 50°C (humidity 0 to 95%)
Dimensions (W×D×H) 40×65×153mm
Weight 160g (Including battery)
*1: Duty ratio 50%
*2: This specification is based on our optical fiber with our test method.
*3: DO NOT disconnect or rewire based only on the trafic signal detection. Make sure to launch the tone signal before disconnecting or rewiring the fiber.

Example of application
Example of application


FURUKAWA ELECTRIC CO., LTD.
2-3, Marunouchi 2-chome, Chiyoda-ku, Tokyo 100-8322, Japan

Phone : +81-3-3286-3434
Fax : +81-3-3286-3440
e-mail : optcom@ho.furukawa.co.jp

BackTop of Page
 
Home of Furukawa electric
© FURUKAWA ELECTRIC CO., LTD.