(Unit : mm)

Model Nominal Inside Diameter Standard Wall Thickness Standards Length
PIT-FS 0.08~0.45 0.013/0.020 500
PIT-S 0.20~2.00 0.04/0.06/0.08 1,000
PIT-LS 2.50/3.00 0.06 1,000

(Note) Wall thickness defers depending on inner diameter. Please see the details from the links below.

PIT-FS

(Unit : mm)

Nominal Inside Diameter Tolerance of Inside Diameter Standard Wall Thickness Standard Outside Diameter Standards Length
0.08 ±0.009 0.013
0.106 500
0.09 ±0.009 0.013 0.116 500
0.10 ±0.009 0.013 0.126 500
0.11 ±0.009 0.02 0.15 500
0.12 ±0.009 0.02 0.16 500
0.13 ±0.009 0.02 0.17 500
0.14 ±0.009 0.02 0.18 500
0.15 ±0.009 0.02 0.19 500
0.16 ±0.009 0.02 0.20 500
0.17 ±0.009 0.02 0.21 500
0.18 ±0.009 0.02 0.22 500
0.19 ±0.009 0.02 0.23 500
0.20 ±0.009 0.02 0.24 500
0.23 ±0.009 0.02 0.27 500
0.25 ±0.009 0.02 0.29 500
0.30 ±0.009 0.02 0.34 500
0.32 ±0.009 0.02 0.36 500
0.36 ±0.009 0.02 0.40 500
0.45 ±0.009 0.02 0.49 500

PIT-S

(Unit : mm)

Nominal Inside Diameter Tolerance of Inside Diameter Standard Wall Thickness Standard Outside Diameter Standards Length
0.20 -0.01 +0.04 0.04 0.28 1000
0.25 -0.01 +0.04 0.04 0.33 1000
0.30 -0.01 +0.04 0.04 0.38 1000
0.35 -0.01 +0.04 0.04 0.43 1000
0.40 -0.01 +0.05 0.04/0.06/0.08 0.48(note 1) 1000
0.50 -0.01 +0.05 0.04/0.06/0.08 0.62(note 2) 1000
0.60 -0.01 +0.05 0.04/0.06/0.08 0.72(note 2) 1000
0.70 -0.01 +0.05 0.06 0.82 1000
0.80 -0.01 +0.05 0.04/0.06/0.08 0.92(note 2) 1000
0.90 -0.01 +0.05 0.06 1.02 1000
1.00 -0.01 +0.09 0.04/0.06/0.08 1.12(note 2) 1000
1.10 -0.01 +0.09 0.06 1.22 1000
1.20 -0.01 +0.09 0.06 1.32 1000
1.30 -0.01 +0.09 0.06 1.42 1000
1.40 -0.01 +0.09 0.06 1.52 1000
1.50 -0.01 +0.09 0.06 1.62 1000
1.60 -0.01 +0.09 0.06 1.72 1000
1.70 -0.01 +0.09 0.06 1.82 1000
1.80 -0.01 +0.09 0.06 1.92 1000
1.90 -0.01 +0.09 0.06 2.02 1000
2.00 -0.01 +0.09 0.06 2.12 1000

(note 1) Wall Thickness at 0.04mm

(note 2) Wall Thickness at 0.06mm

PIT-LS

(Unit : mm)

Nominal Inside Diameter Tolerance of Inside Diameter Standard Wall Thickness Standard Outside Diameter Standards Length
2.50 -0.02 +0.09 0.06 2.62 1000
3.00 -0.02 +0.09 0.06 3.12 1000

(note) This product is not suitable for medical application. Do not use in the application which contacts directly or indirectly to human body, body fluid or drugs and medical devices. For these applications, please check "VASCULEX" developed for medicals.
Polyimide tubing for medical application "VASCULEX®"

Inquiries about Polyimide Tubing